Heliport Controller V3

When the lighting system includes a heliport beacon, the above intensities will automatically be changed for the beacon. So when the system will run at 10% power, the beacon will run at 3%, at 30% power, the beacon will run at 10% and 100% power is for both the beacon and the other lights (ref. ICAO 5.3.2.5)

The controller can be operated in two different modes:

  • Local – Only the front panel buttons will be used in this mode.
  • Remote + Local – in this mode both the front panel buttons and the remote control application can be used.

This mode (from front panel button) must be selected before turning on the mains switch.

Product Code: AL-078-AX


Category: Controller